Glue - cement, standard 25 kg NOVA

Glue - cement, standard 25 kg NOVA

• Color: gray
• Water mixing volume: 5.5 - 6.5 l
• Adhesion strength: ≥0.5 N/mm2
• Drying time in a bucket: about 3 hours
• Open time: 20 minutes
• Country of manufacture: Georgia
• Brand: NOVA

Application

The surface on which standard glue-cement will be applied must be clean, dry and solid. The coarse residue on the surface should be removed. Porous and water-absorbing areas should be moistened before use. Slowly pour the resin cement into a bucket filled with 5.5 - 6.5 l of water and mix with a low-speed mixer until a homogeneous mass is obtained, then let it rest for 5 minutes and mix again with the mixer for 1 - 2 minutes. The prepared grout should be applied to the facing material with an appropriate notched trowel. The prepared grout should be used within a maximum of 20 minutes.
The thickness of the prepared grout is determined by the notched trowel. On facing tiles larger than 20X20 cm, it should be applied on both sides (both on the tile and on the surface), and the size of the trowel teeth should also be increased.
For best results, use a trowel and a rubber mallet. Ambient temperature +5 + 30° C.
Do not apply under direct sunlight.

Consumption:

Ceramic dimensions
10 cm X 10 cm
10 cm X 10 cm - between and and 20 cm X 20 cm
20 cm X 20 cm - between and and 30 cm X 30 cm

Comb consumption
6X6X6 mm 3-4 kg/m2
8X8X8 mm 4-5 kg/m2
10X10X10 mm 6-7 kg/m2 (double-sided application)
The specified data are approximate. To understand the exact consumption, it is recommended to conduct a test.

The above times, 23 ± It is calculated based on a temperature of 2°C and a humidity of 50 ± 5%. At higher temperatures, the duration will be reduced, while at lower temperatures the duration will be increased.

Storage
Unopened packaging can be stored in a dry and cool place for 1 year.

Packaging
25 kg cardboard bag;