Frost and moisture resistant glue-cement for massive tiles TA-15

Frost and moisture resistant glue-cement for massive tiles TA-15

• Color: gray
• Dry powder density: 1.4 ± 0.1 g/cm3
• Adhesion strength: ≥ 1.5 N/mm²
• Scroll down: ≥ 0.5 mm
• Water mixing capacity: 7.0-7.5 L
• Chill drying time: about 2 hours
• Duration of open trial: 30 min
• Possibility to fill earnings: at least 24 hours later
• Fire class: A1
• Brand: NOVA
• Manufacturing country: Georgia

It is a high quality granite and marble resin cement with enhanced elasticity and enhanced slip performance, extended open time of ready-to-use cement based polymer, saturated with cement based polymer. The product is thioxotropic and ultra flexible. It is easy to apply.

Conforms to TS EN 12004 standard, C2TE class.

Usages: The product is used for bonding interior and exterior granite, marble, ceramic, natural stone, large ceramic tiles, glass mosaic, porcelain ceramic or similar tiles. Recommended for use on cement-based plaster and concrete surfaces. Also, the product can be used in hospitals, schools, business centers, busy pedestrian and traffic areas. Can be used for vertical and horizontal bonding of marble, granite and similar heavy materials. It is also used in wet areas, baths, saunas and pools.

Characteristics: TA-15, due to the special composition in the structure, easily adheres to the surface to be used and does not slip. Thanks to its flexibility and durability, it is possible to work with ceramic tiles. It is resistant to temperature differences and has very good adhesion to exterior surfaces. It is easy to apply and its long duration of action saves labor and time.

Times given above, 23 ± at a temperature of 20 C and 50 ± Calculated based on 5% humidity. At higher temperatures, the duration will decrease, and at lower temperatures, the duration will increase.

Application: The surface on which TA-15 will be applied must be clean, dry and solid. Bumps on the surface should be scraped off. Porous and water-absorbing areas should be moistened before use.

Preparation: Pour 7.0-7.5 L of water into a container and add 25 kg of TA-15 slowly. Stir with a low-speed mixer until smooth. The prepared fermentation should be allowed to rest for 5 minutes. Complete the process of laying and adjusting marble or granite in a maximum of 30 minutes. When applying, keep the material away from direct sunlight.

• Medium-sized ceramic tiles of maximum 33X33 cm size and 10 mm thickness on the facades or other similar paving tiles on the walls 3 m. It can be applied up to height. When applying, two-sided gluing should be done, both on the facing tile and on the wall should be applied the prepared adhesive.
• For best results, dovetails and a rubber mallet should be used when applying.
• The ambient temperature should be between +5 + 30 C.

Expense :

Ceramic sizes ;                  &nbsp ; ;       comb    spending

10 cm X 10 cm - between 20 cm X 20 cm         8X8X8 mm             4 – 5 kg / m2

20 cm X 20 cm - between 60 cm X 60 cm          10X10X10 mm      7 – 8 kg / m2 (two-sided application)

Indicated figures are approximate, and testing is recommended to understand the exact cost.

Storage: The unopened package can be stored in a dry, cool place away from moisture and direct sunlight for 1 year.