BETEK

BETEK was founded in 1988 and initially began producing concrete additives, ready-mix mortars, and waterproofing materials. Its entry into the high-quality construction and renovation materials market contributed to the company’s rapid growth.

The company manufactures various types of adhesive cement designed for fixing ceramic tiles and insulation materials, offering a full range of products required for renovation processes.

BETEK products are available in many countries worldwide, including Georgia. The company exports to more than 40 countries, demonstrating its global reach.

Today, BETEK has been successfully operating in the Georgian market for over 20 years and enjoys strong popularity.

BETEK STANDARD

Cement-based tile adhesive with enhanced resistance to vertical slipping.

Applications:

Used for fixing ceramic tiles or similar cladding materials on interior walls and floors, as well as for exterior flooring applications.

Mechanical properties:

Color: Grey
Dry powder density: 1.4±0.1 g/cm³
Adhesion strength: ≥ 0.5 N/mm²
Water mixing ratio: 5.5-6.5 L
Pot life: approximately 3 hours
Open time: 20 minutes

BETEK TA-10

Cement-based adhesive with high resistance to slipping and extended pot life, providing improved performance.

Applications:

Used for ceramic tiles and similar cladding materials in water tanks, bathrooms, restrooms, and kitchens.

Technical properties:

Color: Light grey
Dry powder density: 1.35±0.1 g/cm³
Adhesion strength: ≥ 0.5 N/mm²
Water mixing ratio: 5.5-6.5 L
Pot life: approximately 3 hours
Open time: 30 minutes
Grouting time: after 24-48 hours

BETEK TA-15

Polymer-modified cement-based adhesive with improved flexibility, enhanced anti-slip performance, and extended open time.

Applications:

Suitable for interior and exterior use on granite, swimming pools, marble, ceramic, natural stone, large-format tiles, glass, mosaic, porcelain, and similar cladding materials.

Technical properties:

Color: Grey
Dry powder density: 1.4±0.1 g/cm³
Adhesion strength: ≥ 1.5 N/mm²
Slip resistance: ≥ 0.5 N/mm
Water mixing ratio: 7.0-7.5 L
Pot life: approximately 2 hours
Open time: 30 minutes

BETEK P-40

Cement-based, polymer-fiber reinforced special plaster used for both interior and exterior applications. Designed for bonding and plastering thermal and sound insulation boards such as polystyrene (XPS, EPS) and mineral wool.

Technical properties:

Color: Grey
Adhesion (on polystyrene surface): > 0.08 N/mm² EN 13494
Water absorption: < 0.1 kg/m²h⁰·⁵ EN 1062-3
Impact resistance: > 2 Joules EN 13497